发电机启动开关坏了怎么启动

　　How to start the generator when the starting switch is broken如果发电机启动开关坏了，则应该采用外部电源，将此外部电源直接连接到发电机的起动电路，然后将此外部电源的电压控制在发电机的正常起动电压范围内，即可完成发电机的启动。

　　If the starting switch of the generator is broken, an external power source should be used. This external power source should be directly connected to the starting circuit of the generator, and then the voltage of this external power source should be controlled within the normal starting voltage range of the generator to complete the starting of the generator.

　　开关坏了后，可以考虑用跳闸启动电机。首先，将跳闸螺合到电机的起动端，然后将接线端接入相应的电源接口。在打开跳闸启动按钮时，电机就会启动运转。

　　After the switch is broken, you can consider starting the motor with a trip. Firstly, connect the tripping screw to the starting end of the motor, and then connect the wiring terminal to the corresponding power interface. When the trip start button is turned on, the motor will start running.

　　本文由工业尾气发电机组提供技术支持，更多的详细精彩内容请点击我们的网站http://www.huannengpower.cn，我们将会全心全意为您提供满意的服务。

　　This article is supported by industrial exhaust gas generators. For more detailed and exciting content, please click on our website http://www.huannengpower.cn We will wholeheartedly provide you with satisfactory service.