When the gas engine is used to do work, what are the specific steps of doing work? As a gas generator manufacturer, let me show you the steps of doing work of the gas engine unit!
The crankshaft rotates and the piston moves downward through the connecting rod, while the inlet valve opens. After the air and gaseous fuel are evenly mixed through the mixer, they are sucked into the cylinder. When the piston reaches the bottom dead center, the cylinder is filled with mixed gas.
The crankshaft is driven to rotate under the inertia of the flywheel, and the piston is driven to move from the bottom dead center to the top dead center through the connecting rod. At the same time, the intake and exhaust valves are closed, and the mixture is compressed.
When the piston runs to the top dead center, the spark plug generates sparks under the action of the high-voltage current generated by the ignition signal generator and the ignition ring, igniting the combustible gas in the cylinder. The high temperature and high pressure gas generated during combustion pushes the piston downward, drives the crankshaft to rotate through the connecting rod, and transmits torque by doing work to the outside.
Exhaust stroke: when the piston moves from BDC to TDC, the exhaust valve opens and the inlet valve closes. The exhaust gas after combustion in the cylinder is pushed out by the piston and discharged out of the cylinder along the exhaust duct.
Thank you for your reading. The source of this article is: gas generator unit accessories. For more information and questions, please click: https://www.huannengpower.cnt
We will continue to work hard to provide you with services. Thank you for your support!