The wear failure of generator set is mainly caused by vibration. Not only the vibration of the equipment itself, but also the instability of the surrounding environment will affect the equipment. Let's take a look at the vibration reduction methods that Kaichen power brings to you.
1. When installing the generator set, it is recommended to use shock absorber. The customer should place the unit on a flat and firm top through the shock absorber according to the installation hole of the unit chassis (the shock absorber should be fastened on the concrete with expansion bolts). This can reduce the vibration of the unit during operation and the impact on the building. Therefore, other vibration reduction measures are not recommended without special requirements.
2. In addition to the unit and foundation passing through the damping device, other components of the unit and external connections should also be flexibly connected. For example, the exhaust pipe, oil supply pipe, door oil pipe, wiring cable, etc. connected by the smoke exhaust pipe through the corrugated shock absorber. In addition, in order to minimize the vibration of surrounding objects caused by unit operation, please connect flexibly.
3. Pay attention to the vibration isolation requirements between the internal parts of the generator set. The simple method is lubrication and maintenance to reduce the friction between parts. For the vibration of the generator set itself, the fault must be found and repaired immediately. Only in this way can we reduce the wear of the generator set and ensure the service life of the generator set.
The above is a detailed introduction about the industrial tail gas generator set for you. I hope it will help you. If you have any questions, please contact us. We will provide services for you with a professional attitude https://www.huannengpower.cn