Characteristics of coal-fired generator set

1、发电机组采用柴油发动机为动力，配套发电机。

1. The generator set is powered by diesel engine and equipped with well-known brand generator.

2、机组功率范围广：10~4300KW

2. Wide power range of the unit: 10 ~ 4300kw

3、低油耗、低排放、低噪音

3. Low fuel consumption, low emission and low noise

4、机组性能优良，技术，工作可靠，维护方便

4. The unit has excellent performance, advanced technology, reliable operation and convenient maintenance

5、调压精度高，动态性能好，结构紧凑，使用寿命长

5. High voltage regulation precision, good dynamic performance, compact structure and long service life

6、潍柴产品常年进行高海拔、高温、高寒，“三高”实验，环境适应性强

6. Weichai products are subject to "three high" experiments at high altitude, high temperature and high cold all year round, with strong environmental adaptability

7、起动迅速、并能很快达到全功率 只需几秒，应急1分钟内带到期全负荷（正常5~30MIN）停机过程短，可以频繁起停。 8、维护操作简单，人少，备用期间保养容易

7. It starts quickly and can quickly reach full power in only a few seconds. The shutdown process with expired full load (normal 5 ~ 30min) within 1 minute of emergency is short, and it can start and stop frequently. 8. Simple maintenance operation, few people, easy maintenance during standby

9、建设与发电的综合成本低 10、产品分类丰富，类型上分为：船用发电机组、陆用发电机组；功能结构上分为：用途自动化机组、防雨棚机组、低噪音机组、拖车移动电站机组；行业上分为：民用发电机组、军品发电机组、油田发电机组、电信发电机组等。

9. The comprehensive cost of construction and power generation is the lowest. 10. There are rich product categories, which are divided into marine generator set and land generator set; In terms of function and structure, it is divided into: purpose automation unit, canopy unit, low-noise unit and trailer mobile power station unit; The industry is divided into: Civil generator set, military generator set, oilfield generator set, telecom generator set, etc.

发电机组操作流程

Operation flow of generator set

1、室内气温低于20℃时，开启电加热器，对机器进行预热。

1. When the indoor temperature is lower than 20 ℃, turn on the electric heater to preheat the machine.

2、检查机体及周围有无妨碍运转的杂物，如有应及时清走。

2. Check whether there are sundries hindering the operation of the machine body and its surroundings, and remove them in time.

3、检查曲轴箱油位、燃油箱油位、散热器水位。如油位水位低于规定值，应补充至正常位置。

3. Check the crankcase oil level, fuel tank oil level and radiator water level. If the oil level is lower than the specified value, it shall be added to the normal position.

4、检查燃油供油阀和冷却水截止阀是否处于开通位置。

4. Check whether the fuel supply valve and cooling water stop valve are in the open position.

5、检查柴油发电机组起动电动的蓄电池组电压是否正常。

5. Check whether the battery voltage of diesel generator set starting motor is normal.

6、检验配电屏的试验按钮，观察各报警指示灯有否接通发亮。

6. Check the test button of the distribution panel and observe whether each alarm indicator is on and on.

7、检查配电屏各开关是否置于分闸位置，各仪表指示是否处于零位。

7. Check whether the switches of the distribution panel are in the off position and whether the indication of each instrument is in the zero position.

8、启动进风和排风机。

8. Start the inlet and exhaust fans.

9、按动发动机的起动按钮，使其启动运转。如次起动失败，可按下配电屏上相应的复位按钮，待其警报消除、机组回复正常状态方可进行第二次启动。启动后，机器运转声音正常，冷却水泵运转指示灯亮及路仪表指示正常，启动成功。

9. Press the start button of the engine to start it. If the first start fails, press the corresponding reset button on the distribution panel, and the second start can be carried out only after the alarm is eliminated and the unit returns to normal state. After startup, the machine operates normally, the cooling water pump operation indicator light is on and the road instrument indication is normal, and the startup is successful.

以上就是点火控制器为您提供的新资讯,更多的精彩内容请来自:http://www.huannengpower.cn，我们后续会有更多精彩内容与您分享.

The above is the new information provided by the ignition controller. For more highlights, please come from: http://www.huannengpower.cn , we will share more wonderful content with you later